- Broadcast recording quality condenser microphone.
- Compact design (only 150 mm/6 inches length).
- Ultra lightweight (only 85 g/3 oz).
- 9 volt battery powered, with up to 70 hours battery life.
- Integrated shock mounting, two step High Pass Filter.
Rode VideoMic Pro Compact VMP Shotgun Microphone
The Rode VideoMic Pro compact design is ideal for use with HDSLR cameras, camcorders and audio recorders. Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.
The microphone has a broadcast-quality condenser capsule with a supercardioid pickup pattern to capture audio from the front, while minimizing pickup from the sides and rear. An integrated shockmount and foam windscreen minimize handling and wind noise to keep your recordings crystal clear.
2-step high pass filter
On the rear of the mic, you'll find a 3-way level control that offers -10dB, 0dB, and +20dB modes. There is also a 2-step high pass filter with 0 and 80Hz settings, letting you minimize the impact of low frequency hum, camera motor noise, and similar distractions. The mic has a standard camera shoe and a 3/8 inch threaded mount for easy attachment to cameras and boom poles.
Shotgun microphone designed
Rode VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. The 1/8 inch (3.5mm) plug is compatible with a wide variety of different cameras and audio devices. The VideoMic Pro operates for up to 70 hours on a single 9V battery, allowing you to work in the field without constant replacements.
|100 x 75 x 170 mm|
|Maximum SPL||134 dBSPL|
|Frequency Range||40 Hz - 20 kHz (selected HPF 80)|
|Active Electronics||JFET impedance converter|
|Maximum Output Level||6.9mV ( 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-32.0dB re 1 Volt/Pascal (20.00mV 94 dB SPL) +/- 2 dB 1kHz|
|Equivalent Noise Level||14 dBA|